欧美日韩国产一二三四五区,国产区在线观看成人精品,91亚洲精品国产嫩草,国产丰满的富婆自拍对白,久久精品偷拍视频观看,国产av一区二区中文字幕,久久国产超碰女女av,久久不卡国产一区二区,欧美中文字幕一二三四区,亚洲欧美熟妇欲乱又伦

<delect id="d07zl"></delect>

    1. <rt id="d07zl"></rt>
        <rt id="d07zl"></rt>
        Welcome to Shenzhen Zhongyuan Plastic Co., Ltd!

        News



        Tel:(0755)27151698
        Fax:(0755)27150611
        Mailbox:szzyzcl@163.com / szzy@szzy99.com
        Add:Building A1 and A2, No.1 Industrial Zone, yuliu property company, Gongming town, Bao'an District, Shenzhen
        Industry information

        當前位置:

        首頁 News Industry information

        Adjustment and improvement of plastic shell material shortage

        Release time:2022-03-21

        Shell shortage, also known as lack of glue, insufficient filling, insufficient injection, incomplete plastic shell, etc., is the most common problem we encounter in plastic shell injection molding every day, which is usually manifested in the end of the molding area and the position of fine ribs. Compared with other defects, the debugging is simple, which can be solved by increasing the injection pressure, injection speed, injection position and other methods in the process, but sometimes other factors are not excluded.

        6.jpg


        Adjustment and improvement methods leading to the shortage of plastic shell materials


        1. The setting of injection molding conditions is unreasonable. The injection pressure is too low, the injection speed is too slow, the injection position is too short, and the molding time is too short. Because the amount of glue required for the plastic shell is not enough, the plastic shell is not filled enough (adjust the value of each parameter appropriately).


        2. Whether the injection molding machine has back pressure. If the injection molding machine has no back pressure, or the back pressure of the stored material is too small, the dissolved material is not evenly compacted to ensure uniformity and homogeneity, resulting in insufficient filling of the plastic shell (appropriately increase the back pressure).


        3. Whether the heating ring of the barrel nozzle is damaged and whether the thermocouple is clamped improperly. If the heating ring does not reach the rated temperature, the nozzle will condense, and the resistance during melt injection filling is too large, resulting in insufficient filling of the plastic shell (replace the heating ring and tighten the thermocouple).


        4. Check nozzle blockage by discharging empty bullets. If the nozzle is blocked by iron and the filling is unstable during production, the plastic shell is often accompanied by the phenomenon of more glue and less material (clean the nozzle in time).


        5. Residual material in nozzles and intersections / drums and flanges. If there is material left behind the mold, the plastic shell will lack material due to insufficient pressure in the mold cavity during the injection filling process (solve the problem of material shortage in time).


        6. The mold temperature is uneven or too low. If the temperature of the mold is too low, the solution will condense too early during filling and cannot be filled to the set position, resulting in insufficient plastic shell. (increasing the mold temperature and changing the series water circuit to parallel connection can also appropriately shorten the molding cycle).


        7. For materials with poor fluidity, such as PC, PA, POM, etc., you can increase the diameter of the runner and gate on the mold, technically increase the temperature of the barrel, increase the mold temperature regulator, and add additives to the materials to improve the fluidity, so that the melt can quickly reach the set position in the mold cavity to avoid material shortage of the plastic shell (appropriately increase the mold temperature).

        Copyright: Shenzhen Zhongyuan Plastic Co., Ltd. | mold processing customized manufacturer. If you want to know the processing price of the factory, how much is it, and which is good, please contact us Yue ICP Bei No. 17060480
        北条麻妃在线一区二区| 精品人妻一区二区三区av| 久久精品亚洲2020| 免费av在线超碰人妻| 日韩成人在线视频中文字幕| 日韩av永久在线观看| 精品中文一区二区三区| 国产一区二区久久久精品| 99精品久久久中文字幕| 人妻无码一区二区三区AV| 99中文字幕精品国产| 国产无套粉嫩白浆在线| 国产精品自偷自拍对白| 国产精品999在线播放| 国产精品婷婷久久爽一下| 亚洲人精品亚洲人成在线| 一级片黄色一区二区三区| 日本一区二区在线视频| 国产精品秘入口18禁麻豆免会员| 欧美性特级精品高清在线看| 日本福利视频免费久久久| 中文字幕偷拍亚洲九色| 黑人一区二区三区啪啪网站| A毛片免费全部播放| 亚洲熟妇无码v在线观看| 国产精品成人一区二区| 午夜剧场亚洲狼人一区| 日韩精品不卡一区二区三区| 蜜臀av亚洲一区二区| 亚洲国产综合性感三级自拍 | 亚洲欧美校园春色激情| 午夜精品福利视频观看| 国产精品导航一区二区| 日韩午夜三级一区二区| 欧美日韩在线播放不卡| 久久国产精品亚洲综合| 亚洲成在人线AV中文字幕喷水| 岛国熟女一区二区三区| 国产亚洲欧洲成人综合| 亚洲AV片不卡无码一| 无码乱码天天更新|